SIPS Panels

SIPs can be manufactured to any architectural design. Because the SIPs are manufactured to spec, there is nearly zero waste on the jobsite and labor is reduced significantly. Labor time savings range from 30-40%. SIPs make inside finish work easier to complete; drywall goes up fast and cabinets are quickly attached directly into the SIP facing. 

To read about the new Redford Sundance Conference Center, where SIPs where chosen to frame and insulate the building click here 

Info from StreetInsider.com

Shorter Construction Time

Construction time for a well-built house using SIPs can be less than for a frame home, due to the all-in-one nature of SIPs. The panels can be used as floor, wall and roof.
The house will have a tighter building envelope and the walls will have higher insulating properties. As a result substantial lifetime savings are made.

SIPS Construction Method

 SIPS building systems are a superior alternative to traditional building methods, for the following reasons:

·         SIPS is pre-insulated – there is no additional insulation required

·         SIPS is prefabricated and delivered to site ready for construction – saving up to 30% on labour costs

·         Electrical installations take place up to 30% faster with SIPS

·         With pre-cut SIPS panels, there is no jobsite waste, saving approximately 30% on waste costs

·         Subcontractors can start sooner than with traditional building, resulting in fewer wasted on site days

·         Buildings are finished faster

·         Little or no damage to the surrounding areas, unlike brick and mortar buildings, resulting in lower waste and clean-up costs

Article found on http://www.sips-sa.co.za/sips/sips-construction